Application

Power source

Marking lenght

+39 051 802437

LET’S GET TO THE POINT

Dotlite – Industrial marking machines DPM

Dotpeen Marking
Systems

Lo staff di Berma ti aiuta a trovare la soluzione, standard o personalizzata, più adatta alla tua esigenza di identificazione, marcatura e collaudo.

This site uses technical and analytics cookies. For further information about cookies and how to disable them, please read our Cookie Policy.

LET’S GET TO THE POINT

Thanks to the experience acquired in over 40 years of activity in the field of coding and industrial traceability, BERMA produces highly, reliable and precise dotpeen marking systems.

The selection of dotpeen marking machines use the direct part marking technology (DPM) that can be used on components of any material with surface hardness up to 62 HRC.

BERMA dotpeen marking machines are equipped with compact electronics offering a high storage capacity and several PC connection options (USB, RS-232, TCP / IP). The user interface is simple and intuitive: the programming of the marking can be done directly on the machine, without a PC, through the membrane keyboard and the integrated graphic display. Thanks to the complete IDENTIFY software, always included in the system, it is also possible to manage complex logos and graphics.

BERMA marking device are set for the direct connection of bar code reader with the via RS-232 and are also equipped with various serial access protocol (ASCII) for the for direct driving of the marking system from the Host PC.

“DOT5” marking systems production line have a single punch with electric drive and thanks to their versatility are used in the most of the applications.

“TOP5” marking systems production line are characterized by a sturdy construction that allows to takes advantages of the punch’s performances (up to 6 mm of diameter) in order to realize very deep markings that can resist paint and galvanization.

BERMA marking machines can mark almost all geometries : marking on flat surfaces (example type plates), marking on round workpieces, radially or axially up to cone-shaped parts, and also marking on different levels of a workpiece can be designed any time.

How is working the dot peen marking?

This devices are CNC machines, programmable via computer or special electronics, where a single punch (with pneumatic or electric drive) moved on two axes (XY), carries out very close micro-points, forming continuous or dotted lines (according to the parameters set by the user), so as to form letters, numbers or symbols which constitute the information to be shown on the object to be identified, deforming the contact area. The possibility of changing the actuating times of the punch, enables a fully adjustable marking depth, according to the material and the application of the piece to be marked.

DOTLITE is a registered trademark of BERMA Macchine s.r.l. – all rights are reserved

Benchtop marking machines

The DOTLITE dot peen marking machines made by BERMA are the reference solutions in the marking and in the industrial tractability sector.
These device are compact and reliable and this make its ideal for the user who needs to identify in a simple and indelible way.
The benchtop marking machines, dipends on the head size, are equipped with a support with one or more column that allowed to adjust the marking head height through a screw.
In every BERMA marking machine is possible to adjust the marking head height manually through a screw or automatically through a motorized optional device.
The TOP5 systems have a sturdy construction with double caged roller guides on the Y axis that allows to takes advantages of the punch’s performances (up to 6 mm of diameter) in order to realize very deep markings.

Portable marking machines

The portable marking machine are the best solution to the industrial identification of bulky parts that are too big and too heavy to be moved under a benchtop marking machine.
The DOTLITE portable marking machines made by BERMA are comfortable and adaptable. The practical gun grip and the reduced weight make this device maneuverable and accurate on every surface.

Portable marking machines with battery

The DOTLITE portable marking machines with Ly-ION battery made by BERMA allow to mark every kind of workpiece being free from the limit of the wires.
High performance and great reliability characterize this device and guarantee an operative lifetime up to 3 hours.

Marking machines for integration

The marking machines for integration are identification sistems studied to be insert in other machines, team of robots, production line and so on.
The DOTLITE marking machines for integration made by BERMA are set for the direct connection via RS-232 or TCP/IP and are also equipped with various serial access protocol (ASCII) for the for direct driving of the marking system from the Host PC.
The synchronization is guaranted by the 24VDC digital I/O on the specific connector.
All the marking machines for integration made by BERMA are light and have small dimensions. The controller is separated and it can be installed in a easily accessible area.

Would you like to learn more?

“BERMA’s staff help you to find the best solution, standard or customized, for your needs of identification and marking”.

Berma

© 2018 BERMA Macchine S.r.l. ad unico socio

// Via San Vitale, 33 // 40054 Budrio (BO) Italy
// VAT Code : IT00834321200 // tel. +39 051 802437

PRIVACY POLICY | COOKIE POLICY | Designed by www.caleidosgroup.com with valid HTML5 & CSS 3 code